|
|
|
|
|
|
|
|
Senior Payload RF Systems Engineer
Outline Job Profile:
An experienced payload systems engineer with a strong background in payload output section elements (such as waveguide filters, OMUXs, DEMUXs, test couplers etc) and their application to advanced telecommunications payloads is required to become a key member of the payload engineering team at Portsmouth. Working under an Engineering Manager, the role involves overseeing output section activities across all active projects including specification, problem resolution, validation and in orbit anomaly follow-up. It also encompasses forward looking aspects such as R&D, new product introduction and continuous improvement. Some overseas travel will also be required.
Specific Tasks to be Undertaken:
Specific tasks will include support to the following:
• Design discussions
• Approving standard specifications
• Approving project specific specifications in conjunction with the project payload engineering manager and validation engineer.
• Act as technical focal point with output section element suppliers, with a view to creating development plans, resolving technical problems and ensuring design to cost and schedule.
• Ensuring closure on all technical problems and that lessons learned are implemented across all ongoing and future projects.
• Preparing/presenting technical presentations on output section aspects in front of end customers as required.
• Attending and presenting at project design reviews, as necessary. Establish the need by agreement with the project payload engineering manager.
• Devising and implementing metrics associated with improvements.
• Attending supplier evaluation reviews and make the recommendations of preferred candidate(s) in terms of design, performance, risk, product policy and design to cost requirements.
• Agreeing the content of Generic Statements of Work and Project Specific Modifications including applicability matrices.
• Ensuring validation of output section elements at satellite level once assembled.
• Maintaining an database of all relevant product information
Experience required:
Mandatory: A proven track record and minimum of 7 years post graduate engineering experience in RF systems.
Hardware experience in output section elements and technologies as applicable to RF communications systems
Desirable: Experience in several of the following:
• Spaceborne communications system design and analysis
• Payload system design and analysis
• Payload integration, validation and test
• Digital and analogue communications
• RF component design, build and test for an aerospace application
Qualifications:
Mandatory: BSc in Engineering/ Electronics/Science
Desirable : Higher degree in Electronics, Communications or Aerospace Engineering |
| Job type: Permanent, Full Time · Expiry Date: Friday, 2nd January 2009 |
|
|
|
Quality Manager
Location: Stevenage
Salary: Up to £40,000.00
Our client are world leaders in defence and defence products and they are currently recruiting for a Quality Manager who will provide professional leadership and support on all aspects of Quality and Improvement within the Electronic Engineering (EE) function.
They will be responsible for identifying sustainable Business Improvements to existing methods & processes and support their effective implementation, and Functional Management and teams in the identification and reduction of project risk, Understanding project requirements, identify and implement quality planning for project activities, and support the identification and reduction of project risk.
ACCOUNTABILITIES
• Provide support on all aspects of quality within the EE design, development & technology departments. Apply improvement techniques to critical business issues to promote continuous improvement and internal customer satisfaction
• Support tangible Business Improvements to existing methods & processes via the functional improvement plan or elsewhere, ensuring effective implementation..
• Process Assurance: Provide direct support to the EE Quality Manager to further develop, implement and verify the process-based integrated management system,
• Ensure sub-system product design and development processes are adequately documented, effectively communicated, improved & updated, and are applied on project activities within EE.
• Ensure design & development deliverables (product or dossier) and supplied items are compliant to applicable requirements and standards, and define and maintain sub-system quality activities in conjunction with Product Assurance.
• Identify risks; assess impacts & support risk reduction strategies / action plans, reporting on a monthly basis to EE teams and the EE Quality Manager
• Support to ensure that ISO9001, AS/EN9100, ISO14001, and approvals maintained
SKILLS & KNOWLEDGE
• Senior Quality Engineer/Professional, experienced in integrated management systems
• Sound knowledge of product design and development operations.
• Quality requirements, processes and main external standards.
• Capability to interpret sustainable business improvements & support their effective implementation
Our client is looking for an exceptional individual to join a successful company and bring experience and expertise to the exciting projects they are working on. The successful candidate will be rewarded with an excellent remuneration package and the opportunity for further career development.
The F10 Group offers the services of an Employment Agency for permanent recruitment and the services of an Employment Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Thursday, 4th December 2008 |
|
|
|
Job Title: Application Engineer
Job Function and Objectives:
To provide technical support to our offices and our worldwide customer base.
Main Duties and Key Features:
• Complying with all company policies and procedures including Health, Safety & Environmental
• Providing advice on engineering applications, and solutions to customers technical requirements / problems
• Producing quotations for products selected
• Entering and processing of customer orders, as well as checking technical content
• Liaise with drawing office, planning, and production, to ensure customers requirements on an order are met
• Attending customers site to discuss technical issues / projects
• Attend customers site in role of Service Engineer, when demand requires
• Inspect and report on returned customers product when need arises
• Provide commercial and technical support to the sales team
• Any other duties that may from time to time be reasonably expected
Suggested Qualifications:
Educated to HNC level, and be apprentice trained (or equivalent), with experience of an engineering environment.
Be in possession of a driving licence and passport.
In depth product knowledge of current and past product range required.
F10 have developed an outstanding reputation as one of the UK's leading independent Technical Recruitment Consultancies.
Specialist in Communications, Engineering, FMCG, Health & Safety, Information Technology, Manufacturing, Sales & Marketing, Supply Chain & Logistics and Executive Search & Selection.
At F10 we aim to outperform our competitors and surpass your expectation levels, with our professional, thorough approach and dedicated service.
The F10 Group offers the services of an Employment Agency for permanent recruitment and the services of an Employment Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Tuesday, 30th December 2008 |
|
|
|
Principal EEE Parts Project Engineer
Location: South East
Salary: £30,000 - £38,000
The main function of the Principal EEE Parts Project Engineer is to provide EEE parts Quality support to equipment manufacturers and subcontractors.
Main Tasks:
• Provide EEE (Electrical, Electronic, Electro-mechanical) Parts Quality expertise to support Project level activities, Payload AIT activities and equipment procurement (from external subcontractors and internal equipment manufacturing groups);
• Approval of equipment subcontractor compliance to requirements;
• Attend/support project reviews (EQSR, PDR, CDR, DRB, etc) at subcontractor/internal sites, as required.
• Approval of Procurement Specifications, PA Plans, EEE Parts Plans, Parts Approval Documents (PADs), Declared Components Lists (DCLs), etc.
• Manage Parts Control Board (PCB) process
• Approval of Requests For Deviations, Requests For Waivers, Non-Conformance Reports;
• Attendance at various review boards, including Parts Control Boards, Non-Conformance Review Boards, etc.;
• Perform /support on-site hardware audits and supplier audits.
• PAD and EEE Parts documentation management.
• Participate in internal progress meetings and report on project EEE Parts status.
• Maintain status on DCL issues, Qualification Programs, Radiation Testing and PCB actions, and report as required.
Principal EEE Parts Project Engineer requirements
Essential:
• Previous experience of EEE Parts Engineering in space or other hi-rel applications, preferably over a broad range of part types
• Understanding of Parts Approval Documents and Procurement Specifications
• Awareness of Product Assurance
• Experience of liaison with external suppliers/subcontractors and customer representatives
• Availability to travel to other sites/suppliers/subcontractors
Desirable:
• Degree/HND in EEE Parts Engineering related subject (Electrical/Electronic Engineering, Physics)
• Previous experience as EEE Parts Project Engineer / Quality Engineer / Product Assurance Engineer in European/US space industry
Our client is looking for an exceptional individual to join a successful company and bring experience and expertise to the exciting projects they are working on. The successful candidate will be rewarded with an excellent remuneration package and the opportunity for further career development.
The F10 Group offers the services of an Employment Agency for permanent recruitment and the services of an Employment Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Tuesday, 2nd December 2008 |
|
|
|
Product Assurance Engineer
Location: Sevenoaks
Salary: £30,000 - £38,000
Previous Job Titles: Product Assurance Engineer, PA Engineer, QA Engineer, Quality Assurance Engineer, Quality Engineer.
Our Client provides world-class expertise and experience across all sectors of the space business. They currently have a unique requirement for a Product Assurance Engineer who will be responsible for performing PA engineering work on specific projects for the
Optical Payload Group and will include technical involvement in the engineering principles, materials, processes and parts used in space.
Product Assurance Engineer Key Responsibilities
• Review and implementation of customer requirements on PA.
• Monitoring of project staff activities during design, manufacture, assembly and testing.
• Assistance in selection and procurement of materials, parts and processes and maintenance of project Materials, Parts and Processes Lists / databases.
• Participation in progress meetings, design reviews, etc., including customer meetings.
• Carrying out audits of subcontractors to the company and supervision of subcontractor PA.
• Quality control of manufacturing, assembly and test, including operating the non-conformance system, requests for waivers, organisation of key inspection points, etc.
• Inspection of equipment and verification of its build record.
• Maintenance of specifications and standards.
The chosen candidate will have a background in quality assurance, preferably within the space/optical instrumentation sector, working knowledge of electronic parts and systems and experience of working within a design/development environment would be highly beneficial.
Our client is looking for an exceptional individual to join a successful company and bring experience and expertise to the exciting projects they are working on. The successful candidate will be rewarded with an excellent remuneration package and the opportunity for further career development.
The F10 Group offers the services of an Employment Agency for permanent recruitment and the services of an Employment Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Tuesday, 2nd December 2008 |
|
|
|
Electronics Design Engineer
My client is a world leader in the
research, design, development and
delivery of power solutions for
customers within the high reliability
industry. Their Oxfordshire site
specialises in space products, in
particular they are a word leader in
Lithium-ion batteries and for the
space industry.
Due to continuing success my client
is looking for an Electronics Engineer
to join their team. This is a excellent
new role that offers the candidate an
exciting opportunity to join a growing
company and develop their career
within the high reliability sector.
Role:
Technical design and development
of power electronics products,
specifically AC/DC and DC/DC
power supplies, battery charge
controllers, active power
management systems, solar arrays
etc
Key Tasks:
Produce designs to meet customer
requirements. Some designs will be
entirely from new and some will be a
development of existing product lines.
Create the requirements specification,
developing the system architecture
and product specifications.
Produce documentation to support
design activities to Company
Standards and Design code of
Practice, conforming to ISO9001.
Assisting the Team Leader/Project
manager to define scope, schedule
and resourcing requirements for these
electronic developments.
Technical |
| Job type: Permanent, Full Time · Expiry Date: Thursday, 18th December 2008 |
|
|
|
Role Summary:
To take responsibility for the new
design and maintenance of designs
of digital and analogue board-level
circuitry within the range of products.
To keep abreast of technological
developments within the electronics
field. To understand the overall
function of the product and its role in
the aircraft's electrical power
generation system.
Principle Accountabilities:
To perform electronic design for
products. To meet the specification
requirements for these designs and to
demonstrate this by design analysis
reports and records. To meet the
cost, size, and weight goals of the
product.
To make the most of the resources to
expand own design and engineering
skills.
To understand the interfaces
between the circuitry and external
system and between the analogue
and digital circuitry and to collaborate
with the mechanical and system
design groups to produce effective
overall designs for Generator Control
Units.
To specify custom components
(hybrids, etc).
To understand the operation of
electronic components as needed to
do effective troubleshooting, identify
alternative components, and suggest
improvements to suppliers
To identify and perform the necessary
analysis and testing in order to verify
and demonstrate correct circuit
performance. This includes Worst-
Case analysis, RSS, Monte Carlo,
steady-state and transient thermal,
etc.
To prepare the necessary reports and
release documentation, and
participate in the reviews needed to
bring the design to Production
Standard.
To use appropriate Computer-Aided
Design tools and make
recommendations for tool
improvement / change.
To apply structured problem-solving
methods to technical problems when
appropriate.
To assist in evaluating customer
specifications for future projects.
To progress the development and
validation of these designs until they
are qualified and accepted in
Production Standard units.
To understand the system application
of the design and to collaborate with
the integration and systems groups to
produce effective system designs for
aircraft.
To be aware of cost, timescale,
weight, reliability, and maintainability
criteria and to collaborate with other
members of the project team in order
to meet the overall project
requirements.
To follow GPS operating procedures
and participate in engineering
improvement activities aimed at
increasing efficiency and quality of
work.
F10
Our Engineering Division provides
professional consultancy, specialising
in placing high calibre engineers,
throughout the UK. Providing a fully
confidential service by direct contact,
matching your requirements with
suitable vacancies. The F10 Group
offers the services of an Employment
Agency for permanent recruitment
and the services of an Employment
Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Role Summary:
The Hardware Team Leader is responsible for the personnel and tasks undertaken by the Hardware team. The Hardware team currently consists of approximately 17 permanent members of staff and 10 subcontractors.
The Hardware team is tasked with electronic circuit design and development, requirements management and mature product support activities for Goodrich Power Systems (GPS) electronic products.
Principle Accountabilities:
The Hardware Team Leader is accountable for the performance of the Hardware Team against business objectives
Day to day management of the team and its tasks.
Providing technical guidance and lead engineering to project teams
Owning & maintaining all procedures and work instructions that are specific to the Hardware team's work.
Establishing & maintaining good working relationships with other team leaders within and outside the Engineering department.
Authoring, reviewing and approving engineering documentation related to electronic Hardware
Reviewing the team's working practices and introducing improvements
Making effective allocations of personnel and assets belonging to the Hardware Team
Management of Hardware team personnel, including recruitment, appraisals, training and any performance related issues.
Working with local managers to direct Hardware engineering activities at an overseas Goodrich facility.
Personal Characteristics:
Should be educated to degree level with an industry related degree or equivalent
Experienced in electronics design and development (preferably Aerospace or a similar safety conscious industry)
A strong track record of managing large teams of engineering personnel
Familiarity with modern electronic components, circuits and design techniques.
A proactive style
Mental agility with the ability to think top-down as well as bottom-up.
Ability to follow tasks through to completion
Robust planning skills
Willingness to travel on business as required, possibly including travel to Asia and America.
Ability to gain credibility within the stakeholder audience, including peers, management and customers.
Ability to analyse and resolve complex problems by devising creative and effective solutions.
An aptitude for working systematically, managing the work of others, and providing sound strategic visibility.
A sound understanding of the electronics design and development process
F10
Our Engineering Division provides professional consultancy, specialising in placing high calibre engineers, throughout the UK. Providing a fully confidential service by direct contact, matching your requirements with suitable vacancies. The F10 Group offers the services of an Employment Agency for permanent recruitment and the services of an Employment Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Role Summary:
Working within a flexible engineering
environment this role will commence
by being responsible for
the new design and maintenance of
designs of digital and analogue
board-level circuitry and PCB
assemblies within the range of
products. The successful candidate
will be expected to keep abreast of
technological developments within
the electronics field and to
understand the overall function of the
product and its role in the aircraft's
electrical power generation system.
Principle Accountabilities:
To perform electronic design for
company products. To meet the
specification requirements for these
designs and to demonstrate this by
design analysis reports and records.
To meet the cost, size, and weight
goals of the product.
To give technical guidance in the
work of other engineers involved in
the electronics design process.
To understand the interfaces
between the circuitry and external
system and between the analogue
and digital circuitry and to collaborate
with the mechanical and system
design groups to produce effective
overall designs for Generator Control
Units.
To specify custom components
(hybrids, etc).
To understand the operation of
electronic components as needed to
do effective troubleshooting, identify
alternative components, and suggest
improvements to suppliers
To identify and perform the necessary
analysis and testing in order to verify
and demonstrate correct circuit
performance. This includes Worst-
Case analysis, RSS, Monte Carlo,
steady-state and transient thermal,
etc.
To prepare the necessary reports and
release documentation, and hold the
reviews needed to bring the design to
Production Standard.
To use appropriate Computer-Aided
Design tools and make
recommendations for tool
improvement / change.
To apply structured problem-solving
methods to technical problems when
appropriate.
To prepare work plans and estimates
of cost and time required to realise a
design.
To assist in evaluating customer
specifications for future projects.
To progress the development and
validation of these designs until they
are qualified and accepted in
Production Standard units.
To understand the system application
of the design and to collaborate with
the integration and systems groups to
produce effective system designs for
aircraft.
Personal Characteristics: To be
considered, candidates must have
A proactive style, team spirit, high
energy level, and positive outlook.
F10
Our Engineering Division provides
professional consultancy, specialising
in placing high calibre engineers,
throughout the UK. Providing a fully
confidential service by direct contact,
matching your requirements with
suitable vacancies. The F10 Group
offers the services of an Employment
Agency for permanent recruitment
and the services of an Employment
Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Role Summary
To take responsibility for design,
validation, verification, certification
and maintenance tasks for new and
existing FPGA designs within the
range of products. To perform peer
review of code, verification and
deliverables, and to support the
effective application of FPGA / ASIC
technologies, tools and processes.
The successful candidate will be
expected to keep abreast of
technological developments within
the electronics field and to
understand the overall function of the
product and its role in the aircraft's
electrical power generation system.
Principle Accountabilities
1. To be responsible for
FPGA design from concept to the
achievement of specification
compliance and DO-254 certification
in line with applicable processes.
2. To contribute to concept
definition, evaluation, specification
and interface design of FPGAs,
identifying efficient solutions.
3. To estimate realistic
schedules for FPGA workpackage
tasks.
4. To perform VHDL code
design to applicable processes and
standard, maintaining compliance
with specification and traceability.
5. To perform simulation test
design to applicable processes/
standard to demonstrate compliance
to specification (includes definition of
verification requirements and report).
6. To support system/product
development changes with FPGA
revisions under the required standard
of configuration management.
7. To prepare and maintain
the necessary documentation and
pass reviews needed for DO-254
certification and production release.
8. To act as independent /
peer reviewer of deliverables
produced by others (specification,
code, firmware release, testbench,
verification plan and report).
Personal Characteristics
1. A proactive style, team
spirit, high energy level, and positive
outlook.
2. Commitment to deliver with
appropriate diligence.
3. Good written and verbal
communication skills.
4. A good level of expertise in
general electronics design
commensurate with the position of a
Senior Design Engineer.
5. Demonstrable practical
experience in digital electronics.
6. Demonstrable practical
experience of FPGA design including
VHDL design, simulation and
synthesis.
7. Familiarity with FPGA
technologies (e.g. Actel, Xilinx,
Altera).
8. Experience with the
following software tools VHDL
simulators (e.g. Modelsim), synthesis
tools (e.g. Synplicity).
9. A good track record in
FPGA design.
10. Good problem-solving
skills.
F10
Our Engineering Division provides
professional consultancy, specialising
in placing high calibre engineers,
throughout the UK. Providing a fully
confidential service by direct contact,
matching your requirements with
suitable vacancies. The F10 Group
offers the services of an Employment
Agency for permanent recruitment
and the services of an Employment
Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Summary
This role is to lead a small team of
engineers ensuring the timely
availability of test equipment for
aerospace products and systems
from concept through development.
The team will ensure that the test
equipment will improve in capability
during the development phase of the
product and lead to seamless
production transfer. The role will have
a number of direct reports.
The test equipment is expected to be
developed jointly with the production
test team to utilise latest test
concepts to facilitate flexibility of test
and modular re-use. It is expected
that the test equipment will generally
be a mixture of bought-in equipment
and custom made items. Web
connectivity for remote access,
control and analysis is expected to
feature. Tools to facilitate data
analysis and presentation must be
provided as appropriate.
Principal Accountabilities
· Ensure timely availability of
suitable test equipment for a variety
of development projects
· Establish product test
requirements with various project
teams and customers
· Manage creation of
development test specifications and
documentation
· Ensure compatibility of
development test requirements with
production test capabilities
· Manage the development
test documentation to ensure a
smooth and speedy transition to
production test
· Support the production test
team in the development of future
test capabilities
· Create suitable project
plans for the procurement of
development test equipment and
work to them
· Create suitable project
plans for the handover of
development test activities to the
production test team and work to
them
· Manage the engineering
development test team
· Mentor, develop and
appraise direct reports
Personal Characteristics
Essential
Significant experience in electronic
engineering of which at least 2 years
must have been recent aerospace
test experience
Knowledgeable about latest
electronic test technologies
Electronics degree or similar
Analogue and digital electronics
design skills
Experience of formal software design
in any modern high level programming
language
Knowledge of statistics as applied to
statistical process control in
production testing
Team leadership experience
Negotiating skills
Planning skills
Ability to manage suppliers
Readiness to travel
Capable of filling customer facing role
Chartered Engineer
Desirable
Commercial understanding
Budget ownership experience
Quality systems knowledge
Understanding of databases
Six sigma green or black belt
The F10 Group offers the services of
an Employment Agency for
permanent recruitment and the
services of an Employment Business
for contract recruitment. Only apply
for this vacancy if your experience
matches the essential requirements, if
you reside within the UK and are
available to attend an interview. |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
We are looking for Test Development
Engineers at all levels to join a new
team within a leading Aerospace
organisation. These Engineers range
from Team Leaders/Managers,
Senior Design Engineers and Junior
Engineers.
This company offers an extensive
range of products, systems and
services for aircraft and engine
manufacturers, airlines and defence
forces around the world. From
aerostructures and actuation systems
to landing gear, engine control
systems, sensors and safety systems,
the products are on almost every
aircraft in the world.
Skills required for these roles:
Experience of Test Equipment
Design Engineering
National Instruments Labview /
Teststand / Labwindows CVI
Analogue and Digital Electronic
Design Experience
Writing test scripts and plans
Design for Test / DFT
PXI, VXI, SCXI
Power Supplies / Power Systems
F10
The F10 Group offers the services of
an Employment Agency for
permanent recruitment and the
services of an Employment Business
for contract recruitment. Only apply
for this vacancy if your experience
matches the essential requirements, if
you reside within the UK and are
available to attend an interview. |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Job
As Senior Power Electronics
Engineer you will be responsible for
the new design, development and
qualification of power electronics
products.
Company
As Senior Power Electronics
Engineer, you will have the
opportunity to work with a company
that offers an extensive range of
products, systems and services for
aircraft and engine manufacturers,
airlines and defence forces around
the world. From aerostructures and
actuation systems to landing gear,
engine control systems, sensors and
safety systems, the products are on
almost every aircraft in the world.
Applicants
You will be responsible for the design
and development of power
electronics for power conversion and
power quality applications. To meet
the specification requirements for
these designs and to demonstrate
this by design analysis reports and
records. To meet the cost, size, and
weight goals of the product.
Skill sets Power devices IGBTs,
MOSFETs, Bipolar transistors, Power
circuit design and development up to
500 Amps
F10
Our Engineering Division provides
professional consultancy, specialising
in placing high calibre engineers,
throughout the UK. Providing a fully
confidential service by direct contact,
matching your requirements with
suitable vacancies. The F10 Group
offers the services of an Employment
Agency for permanent recruitment
and the services of an Employment
Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Job Description
You will work as part of
multidisciplined team in the design of
Solid State Power Amplifier (SSPA)
products for spaceflight application.
The role will be to support the team in
the design and analysis of electronic
circuits for amplifier bias regulation,
amplifier control functions, telemetry /
telecommand and DC power
regulation. The work will be a mix of
detailed design and analysis together
with practical hands-on
implementation of circuits, design
proving and troubleshooting.
The team enjoys a world leading
position in SSPA supply to the
aerospace market. Current
programmes include AMC5R (US
Customer), Alphasat (INMARSAT),
Glonass (Russian Customer) and
Galileo (ESA). In addition to this, the
team is undertaking some very
exciting product development with
high power Galium Nitride SSPAs.
Prospects for further contracts are
excellent.
Requirements
Mandatory requirements are:
An HND or similar qualification in
Electronics / Electrical Engineering.
Proven experience in the design of
analogue electronics products and a
working familiarity with digital design.
A good awareness of electronic
circuit implementation / packaging
options (PCB / multi-layer /
conventional hybrid / ASIC) and
overall design constraints.
It would be beneficial to be familiar
with:
Telemetry and telecommand
protocols and interfaces
Power Bus requirements and DC/DC
converters
EMC constraints and design practice
Radiation hardening issues
RF / microwave amplifiers
Military / space requirements
Able to perform Worst Case and Parts
Stress analyses
F10
Our Engineering Division provides
professional consultancy, specialising
in placing high calibre engineers,
throughout the UK. Providing a fully
confidential service by direct contact,
matching your requirements with
suitable vacancies. The F10 Group
offers the services of an Employment
Agency for permanent recruitment
and the services of an Employment
Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Company
Our client is a global space industry
leader, with world-class expertise and
extensive experience across all
sectors of the space business
Job description -Test Engineer.
Electro-Mechanical Structural and
mechanism test engineering role.
Involving Mechanical Test Design,
Project engineering of small to large
test set ups, Overseeing test build,
Write procedures. Assist with
Instrumentation set up and through
channel verification, Hydraulic control
Systems, Conducting test
programmes. Writing reports.
Attendance of meetings to review
tests and results.
Computer Literate. Working
knowledge of workshop techniques.
Good interpersonal skills, able to
communicate at all levels.
Desirable Additional Instrumentation,
Data acquisition experience,
hydraulic control systems.
F10
Our Engineering Division provides
professional consultancy, specialising
in placing high calibre engineers,
throughout the UK. Providing a fully
confidential service by direct contact,
matching your requirements with
suitable vacancies. The F10 Group
offers the services of an Employment
Agency for permanent recruitment
and the services of an Employment
Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
EMC Design Engineer
Job outline
An experienced EMC engineer is
required to undertake EMC
engineering tasks on RF
communications payload projects,
proposals and studies.
Specific tasks will include:
Requirements analysis
Equipment specification development
Advise on EMC control techniques
and practices
EMC design analysis
Preparation of test specifications and
procedures as part of a
multidisciplinary team
Involvement in testing of equipments,
controlling of test programmes and
assisting with test reports
Liaison with customer representatives
and participation in test reviews,
design reviews project meetings
Liaison with Suppliers to achieve
compliant EMC designs
Ensure compliant EMC System
performance
Assisting Test Personnel during EMC
Testing
Suitable candidates will have:
Demonstrated professional
competence in EMC systems
engineering
A methodical approach to work, with
sufficient commitment and drive to
complete tasks, even where adverse
conditions are encountered
Strong analytical skills
The experience of working directly
with customers and with the ability to
present ideas and concepts to the
customer with authority.
The ability efficiently organize and co-
ordinate their work.
The ability to generate innovative
solutions and to communicate them
Knowledge of EMC issues associated
with communication payloads
operating in the range up to 30 GHz
and beyond.
Experience Required
Knowledge and experience of EMC
design techniques and practice to
meet Military / Defence / Avionics
specifications
Relevant Standards: Mil Std
461/462; Def Stan 59 41; RTCA-
D0160.
Tools/Equipment
PC literate, MS Office,
Familiarity with EMC Test equipment
and hands on capability with an
exposure to the test environment and
how it works, use of spectrum
analysers, receivers and field
generation systems.
Qualifications
HNC, HND, BSc or higher
qualification in physics, electrical
engineering or related subjects.
Main Responsibilities
An experienced EMC engineer is
required to undertake EMC
engineering tasks on RF
communications payload projects,
proposals and studies.
F10
Our Engineering Division provides
professional consultancy, specialising
in placing high calibre engineers,
throughout the UK. Providing a fully
confidential service by direct contact,
matching your requirements with
suitable vacancies. The F10 Group
offers the services of an Employment
Agency for permanent recruitment
and the services of an Employment
Business for contract recruitment. |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Job
The Hardware Design Engineer will
be involved with detailed electronic
design activities for a range of
satellite equipment.
Company
As Hardware Design Engineer, you
will have the opportunity to work with
a global leader in the space and
satellite industry, with world-class
expertise and extensive experience
across all sectors of the business.
Applicants
The successful candidate will have a
strong understanding of electrical and
electronic engineering fundamentals.
Knowledge |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Job Description
Perform design and development
duties working within a team of
skilled engineers broadly working on
security products such as
“Cryptographic Security Units” for
satellite systems.
Main Activities
Design and development of complex
digital electronic systems for flight
Security design and security analysis
for commercial or high-grade / military
products. e.g. Security domain
analysis, use of Security enforcing
functions...
3rd party security evaluation e.g.
Common Criteria / ITSEC / UK
COMSEC
Preparing / using a Common Criteria
Security Target
Provide detailed description of the
equipment Security Architecture
(including security analysis and trade-
offs), and seeking approval from the
National Evaluation Agency.
Defining and planning the various
security evaluation activities to be
performed (CC, COMSEC,
TEMPEST) in conjunction with the
National Evaluation Agency /
independent subcontractors.
Clarifying the Security Development
process to be followed.
Designing for manufacture and test
Requirements
Essential
A good degree in physics or
electronic engineering and proven
design experience. Specific
experience in designing
cryptographic units for space
applications is desirable but not
essential. However knowledge |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Job
The Lead Hardware Engineer will be
involved with detailed design
activities including line and technical
management of a team of skilled
hardware electronic design engineers
carrying out design of complex digital
and analogue electronics for a range
of state of the art equipment.
Company
As Lead Hardware Engineer, you will
have the opportunity to work with a
global leader in the space and
satellite industry, with world-class
expertise and extensive experience
across all sectors of the business.
Applicants
Knowledge |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
Job
The Mixed Signal Design Engineer
will be involved with detailed design
activities including the development
of module and system level delay
measurement architectures available
for deployment within complex
systems.
Company
As Mixed Signal Design Engineer,
you will have the opportunity to work
with a global leader in the space and
satellite industry, with world-class
expertise and extensive experience
across all sectors of the business.
Applicants
Knowledge |
| Job type: Permanent, Full Time · Expiry Date: Friday, 12th December 2008 |
|
|
|
|
|
|
|
|
